Upgrade Your MultiMode AFM
Upgrade Your MultiMode AFM
You’ll be surprised at the new things your old AFM can do!
Almost any operational Veeco or Bruker MultiMode can be upgraded to the very latest functionality of the new Bruker MultiMode 8-HR. This upgrade enables a whole range of new capabilities not possible on earlier generation MultiMode AFMs!
Contact us to find out more about upgrading to the latest MultiMode 8-HR:
Contact us on +44 (0)1223 422 269 or info@blue-scientific.com
Watch a recorded webinar
MultiMode 8 image of pentacene layers (1.7nm thick) on an HMDS-treated silicon oxide surface.
MultiMode 8 image of polymer brush structures using ScanAsyst. Scan size 750nm.
Upgrade for New Features!
Upgrading your MultiMode enables many new software features and hardware accessories that were not possible in earlier generations, including:
PeakForce Tapping® – How AFM Should Be
- Highest resolution AFM imaging
- Superior, direct control of tip-surface interaction forces
- Improved ease of use, especially for fluid imaging (no tuning required)
- PeakForce QNM® quantitative mechanical property mapping
- >1000 publications to date: the fastest growing new AFM mode
ScanAsyst
- Self-optimising AFM mode
- Users of all levels can achieve “expert level” results
Fast Scanning
- 20x faster survey scans
- 6x faster scans at no loss of resolution in air with ScanAsyst-HR
Advanced Electrical Modes
- Highest resolution quantitative surface potential imaging with PeakForce KPFM™
- High resolution, non-destructive, quantitative conductivity mapping with PeakForce TUNA™
Latest Generation NanoScope Software
- NanoScope version 9.2
- Improved algorithms for imaging
- Fast force volume mapping
- Up to 5k * 5k pixel imaging
- Fully supported 64 bit Windows 7 operating system
Eligibility
This upgrade is available for MultiMode V systems (based on the NanoScope V controller) and MultiMode systems based on older legacy NanoScope controllers (e.g. NS3,NS3a, NS3D, NSIV).
Webinar: Find out more…
To learn more about the possibilities and benefits of upgrading your MultiMode AFM, join our free, live webinar on Monday 27th February 2017 at 1pm European time. The live webinar has now passed.
The webinar is presented by Dr. Samuel Lesko, European Applications Manager of Bruker Nano Surfaces and will cover:
- Practical aspects of the upgrade
- Theory and benefits of Peak Force Tapping and related modes
- Advanced software features in the latest generation of NanoScope software
Or contact Blue Scientific directly to find out how to upgrade your old MultiMode AFM to the latest generation MultiMode 8-HR:
